Operation of Machine
Introduction- Enclosure
1. Panel Dimensions
2. Gear plate Layout
Note: Click on the components name for the Manuals
3. Maintenance
Important Precautions:
READ this manual before operating or servicing this equipment.
-
ALWAYS remove power and wait at least 30 seconds before connecting/disconnecting any internal harnesses. Failure to observe these precautions may result in damage to, or destruction of, the equipment.
-
ALWAYS take proper precautions when handling static-sensitive devices.
-
SAVE this manual for future reference.
-
DO NOT allow untrained personnel to operate, clean, inspect, maintain, service, or tamper with this equipment.
-
DO NOT connect or disconnect any digital or analogue components to the equipment with power connected, or damage may result.
Click the below maintenance schedule for the control panel.
4. Spare Parts
Note: Click on the Description for details about Spare parts
3.
5.
Description
Consumables
Essential
Recomended
Sr No.
1.
2.
4.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
1
1
1
1
2
2
2
5
1
2
5
1
1
5
2
2
5
2
2
Omron 10m Standard Encoder Cbl
5
2
5
10
2
2
2
2
5. Risk Assessment
Risk Assessment or HAZOP, or a Hazard and Operability Study, is a systematic way to identify possible hazards in a work process. In this approach, the process is broken down into steps, and every variation in work parameters is considered for each step, to see what could go wrong.
Please refer the below attachment for HAZOP Document.