Operation of Machine
Introduction
The 16709 Case Errector was designed and manufactured by Bector Automation RML Engineering India Pvt. Ltd. For Amol Pharmaceuticals Ptv.Ltd
The Case Errector Machine form the shipper with bottom Tapping. In which Magazine and Picture Frame assembly is used to hold the shippers. It is equipped with motor and chain drive, also it has photoelectric sensor to detect the presence of the shippers if shippers are not present then magazine will generate shipper empty level alarm. The shippers will be loaded manually on the magazine.
The Plucker will pick one shipper at a time and place it on the Flap Folding assembly and erect the case with the help of vacuum station. After the case erection the minor and major flaps of the shipper will get closed by using the pneumatic cylinders and shipper transferred on the Tapping Assembly by using linear side Shift cylinder. On Tapping Assembly the formed shipper will Prepare with Bottom Tape with the help of two motors and Tapping tools.
1.1. Major Sub-Assemblies List
Note: Click on the Image for the more details about the Assemblies.
1. Magazine & Picture frame assembly
1. Magazine & 2. Picture frame assembly
3..Case erector assembly
4.. Modular infeed conveyor
2. Warranty
2.1 Machine Guarantee
Bector Automation RML India Pvt Ltd guarantees this machine to be free from defects in material or workmanship under normal operation, as defined in the contract, for a period of 12 months following Take-over.
Bector Automation RML India Pvt Ltd agrees under this warranty to repair or replace at our discretion any original part which fails. This includes all costs of labour on site provided by Bector Automation RML India Pvt Ltd or our authorised agent for 6 months following Take-over.
This warranty will not cover any section of the machine that has been modified by any party other than Bector Automation RML India Pvt Ltd. Issues caused by improper operation or maintenance will not be covered.
2.2 Software Guarantee
All software and software engineering are guaranteed for a period of 90 days following Take-over. Request for Warranty Assistance In the event of a warranty fault, it is imperative that the customer gathers as much information as possible about the fault including a part number identification from section 7 of this manual and contact rml without delay.
2.3 Exclusions
The warranty excludes normal consumable items such as vacuum cups and glue nozzles. Also excluded is normal wear and tear to items such as bearings and conveyor belting.
Our contact details:
Bector Automation RML India Pvt.
Ltd.Plot No. 24, Gat. No. 613/1
,Kurali, Tal. – Khed
Dist. Pune 410501
Maharashtra, India
P +91 7506506099