1. Introduction
The 16607 Cobot Case Packer with Cobot Palletizer was designed and manufactured by Bector Automation RML Engineering India Pvt. Ltd. For Strides Pharma Inc.
​
The p255i-Cobot Case Packer with Cobot Palletizer consists of Modular in-feed conveyor to receive the bottles. The row of bottles is formed at the end of in-feed conveyor and this row of bottles conveyed to collation unit, the conveyor comprises photo sensor inspection of bottles passing through and pneumatic stopper cylinder to stop the bottle flow. The row of bottles is side shifted to collation table by Servo Mechanism. And two no. of columns are formed on collation table. The proximity sensor on the collation unit is used to detect the servo home position and photoelectric sensor is used to detect bottle presence at the collation unit.
​
Magazine and Picture Frame assembly is used to hold the shippers. It is equipped with two motors and chain drive, also it has proximity sensor and photoelectric sensor to detect the presence of the shippers if shippers are not present then magazine will generate shipper empty level alarm. The shippers will be loaded manually on the magazine.
​
The case erect robot (FANUC LR MATE 200 iD) will pick one shipper at a time and place it on the vacuum station of the case erector assembly and erect the case with the help of vacuum station 1 and 2. After the case erection the minor and major flaps of the shipper will get closed by using the pneumatic cylinders and shipper transferred on the tilting conveyor by using linear push cylinder. On tilting conveyor shipper will hold by using the shipper hold cylinder after that linear cylinder will get retract and tilting cylinder will get retracted.
​
After shipper present on the tilting conveyor matrix pick and place Cobot (FANUC CRX-20iA) will pick the matrix from the collation table and place into the shipper. Collation scanner will trigger and scan the placed matrix. Shipper will have transferred to the taping machine for top and bottom taping. After applying taping shipper transferred to the labelling conveyor. Photoelectric sensor on labelling and infeed roller conveyor are used to detect presence of shipper. Label applied on the shipper by using Videojet label applicator and shipper scanned by loop closing scanner and conveyed to the palletizing infeed roller conveyor.
​
Palletizing Cobot (FANUC CRX 25iA) will pick the shipper and place on the accepted and rejected pallet according to the loop scanner and collation scanner decision. The filled pallet removed manually, and new pallet placed manually. photoelectric sensor is used to detect the presence of the pallets.
​
​
​
​
1.1. Major Sub-Assemblies List
​Note: Click on the assemblies for more details about the sub-assemblies. ​​
​
Click on the assembly name to get their photos and videos.
2. Warranty
2.1 Machine Guarantee
Bector Automation RML India Pvt Ltd guarantees this machine to be free from defects in material or workmanship under normal operation, as defined in the contract, for a period of 12 months following takeover.
​
Bector Automation RML India Pvt Ltd agrees under this warranty to repair or replace at our discretion any original part that fails. This includes all costs of labor on-site provided by Bector Automation RML India Pvt Ltd or our authorized agent for 6 months following the takeover.
​
This warranty will not cover any section of the machine that has been modified by any party other than Bector Automation RML India Pvt Ltd. Issues caused by improper operation or maintenance will not be covered.
2.2 Software Guarantee
All software and software engineering are guaranteed for a period of 90 days following the takeover. Request for Warranty Assistance In the event of a warranty fault, it is imperative that the customer gathers as much information as possible about the fault including a part number identification from section 7 of this manual and contact rml without delay.
2.3 Exclusions
The warranty excludes normal consumable items such as vacuum cups and glue nozzles. Also excluded is normal wear and tear to items such as bearings and conveyor belting.
​
​
Our contact details:
Bector Automation RML India Pvt. Ltd. Plot No. G/9/2/3. Phase No.-3, Nighoje,
Tal. - Khed, Dist. - Pune 410 501,
Maharashtra, India
P +91 7506506099