Operation of Machine
Size Adjustment, Machine Setting & Operating Instructions
1. Size Adjustment
Size adjustment is not required during operation.
However, the machine is designed to handle two fixed product formats.
No manual size adjustment mechanism is provided during running conditions.
2. Product Dimensions
The machine is configured for the following two product types:
Product 1
Length: ___ mm
Width: ___ mm
Height: ___ mm
Product 2
Length: ___ mm
Width: ___ mm
Height: ___ mm
3. Machine Setting
-
Machine settings are pre-configured for both product formats.
-
Changeover settings (if applicable) are already predefined.
-
Side guides, sensors, and conveyor settings are set as per product requirement.
-
No manual adjustment is required during normal operation.
-
Ensure correct product selection before starting the machine.
4. Operating Instructions
-
Run only the specified approved products on this machine.
-
Ensure correct product format is selected before operation.
-
Do not operate with any unapproved product or size.
-
Do not change machine settings without prior approval.
-
Ensure proper product placement for smooth operation.
-
Maintain proper alignment for continuous flow.
5. Important Note
-
The machine is configured only for the two specified product formats.
-
Any additional product requires engineering approval and reconfiguration.
-
Do not attempt manual adjustments during operation.
-
Incorrect settings may affect machine performance and product quality.