top of page
BAR Logo #1.jpg

Sub-Assemblies Introduction

1. Rotary Table Assembly

1.1.3D Model

  • Product Contact Parts             -   SS304

  • Product Non-Contact Parts     -   MS, RAL 7045

Rotary Table Assembly 

16913-18106 ROTORY IMG.png

1.2 Rotary Table Assembly

  • The rotary table assembly receives cartons from the PNS Machine Assembly and positions them for further processing.

  • The assembly consists of a rotary cylinder, plucker cylinder, stopper cylinder, and pusher cylinder with reed feedback interlocks.

  • The plucker cylinder pulls the carton onto the rotary table while the stopper holds it, and the table rotates based on SKU selection.

  • The pusher cylinder transfers the carton to the Infeed Collation Assembly.

2. Infeed Collation Conveyor

2.1.3D Model

  • Product Contact Parts             -   SS304

  • Product Non-Contact Parts     -   MS, RAL 7045

Infeed Collation Conveyor

2.2 Infeed Collation Conveyor

  • The infeed collation assembly receives cartons from the Rotary Table Assembly.

  • The aggregation section scans cartons and processes accept/reject signals with rejection handled by a rejection cylinder and sensors.

  • Accepted cartons move to side shifting where cylinders group cartons using multiple sensors.

  • The grouped cartons are transferred to the Collation Platform Assembly.

3. Collation Unit

3.1.3D Model

  • Product Contact Parts             -   SS304

  • Product Non-Contact Parts     -   MS, RAL 7045

 Collation Unit

3.2 Collation Unit

  • The collation platform assembly receives grouped cartons from the Infeed Collation Assembly.

  • It consists of stopper and matrix pushing cylinders with reed feedback and matrix detect sensor.

  • The assembly forms and holds the matrix until proper detection is achieved.

  • The matrix is then ready for pickup by the robot.

4. Shipper Magazine & Picture Frame

4.1.3D Model

  • Product Contact Parts             -   SS304

  • Product Non-Contact Parts     -   MS, RAL 7045

Shipper Magazine & Picture Frame

4.2 Shipper Magazine & Picture Frame

  • The assembly stores flat shippers and feeds them towards the pick position for further processing.

  • It consists of a magazine with motor and chain drive system along with a picture frame to hold and align the shipper properly.

  • Sensors are provided to detect shipper presence in the magazine and at the picture frame for proper positioning.

  • The assembly ensures the shipper is correctly aligned and ready for pickup by the Plucker Assembly, and generates an alarm if no shipper is available.

5. Plucker Unit Assembly

5.1.3D Model

  • Product Contact Parts             -   SS304

  • Product Non-Contact Parts     -   MS, RAL 7045

Plucker unit Assembly

5.2 Plucker Unit Assembly

  • The plucker assembly picks the flat shipper from the Shipper Magazine Assembly.

  • It consists of a pneumatic plucker cylinder with sensor feedback.

  • The shipper is held from one face using vacuum or mechanical grip.

  • The picked shipper is transferred to the bottom flap folding section.

6. Flap Folding Assembly

6.1.3D Model

  • Product Contact Parts             -   SS304

  • Product Non-Contact Parts     -   MS, RAL 7045

Flap Folding

6.2 Flap Folding Assembly

  • This assembly receives the shipper from the Plucker Assembly.

  • It consists of pneumatic cylinders for closing bottom minor flaps.

  • The flaps are folded and positioned properly for sealing.

  • Sensors verify proper flap closing and shipper formation.

7. Robot & Pallet Locater

7.1.3D Model

  • Product Contact Parts             -   SS304

  • Product Non-Contact Parts     -   MS, RAL 7045

Robot & Pallet Locater

7.2 Robot & Pallet Locater

  • The robot (ABB IRB4600) picks the matrix from the Collation Platform Assembly.

  • It places the matrix into the formed shipper after bottom flap closing.

  • The pickhead uses vacuum and pneumatic cylinders with pressure and reed feedback.

  • If pick fails, the robot returns home and generates an alarm.

8. Pusher Assembly

8.1.3D Model

  • Product Contact Parts             -   SS304

  • Product Non-Contact Parts     -   MS, RAL 7045

Pusher Assembly

8.2 Pusher Assembly

  • The pusher assembly receives the filled shipper after robot loading.

  • It consists of a servo-based pusher mechanism.

  • The assembly pushes the filled shipper into the taping machine.

  • It ensures smooth transfer of shipper for sealing operation.

9. Tapping Machine

9.1.3D Model

  • Product Contact Parts             -   SS304

  • Product Non-Contact Parts     -   MS, RAL 7045

Tapping Machine

9.2 Tapping Machine

  • The taping machine receives the filled shipper from the Pusher Assembly.

  • It consists of motors, flap closing mechanisms, and sensors for tape application.

  • The machine closes flaps and applies tape on the shipper.

  • The sealed shipper is transferred to the Labelling Conveyor Assembly.

10. Labelling Conveyor Assembly

10.1.3D Model

  • Product Contact Parts             -   SS304

  • Product Non-Contact Parts     -   MS, RAL 7045

Labelling Conveyor Assembly

10.2 Labelling Conveyor 

  • The labelling conveyor receives the sealed shipper from the Taping Machine Assembly and transfers it towards the end of the conveyor.

  • Two sensors are provided on either side of the conveyor to detect shipper presence at the label application positions.

  • The conveyor moves the shipper in a controlled manner through both label application stations.

  • The shipper is positioned correctly for dynamic and pre-print label application.

11. Label Applicator

11.1.3D Model

  • Product Contact Parts             -   SS304

  • Product Non-Contact Parts     -   MS, RAL 7045

Label Applicator

11.2 Label Applicator

  • The label applicator receives the shipper at the defined position on the Labelling Conveyor Assembly.

  • It communicates with the PNS Machine Assembly for serial number generation.

  • The label is printed in real-time and applied on the shipper during movement.

  • The applicator ensures correct placement of the generated label on the shipper.

12. Pre-Print Label Applicator Assembly

12.1.3D Model

  • Product Contact Parts             -   SS304

  • Product Non-Contact Parts     -   MS, RAL 7045

Pre-Print Label Applicator 

12.2 Pre-Print Label Applicator

  • The pre-print label applicator receives the shipper from the Labelling Conveyor Assembly.

  • It uses a roll of pre-printed labels provided by the customer.

  • The applicator detects the shipper and applies the label at the required position.

  • The labelled shipper is then transferred for further processing.

bottom of page