top of page
BAR Logo #1_edited_edited.png

Electrical 

1. PLC Program

  1. The program is supplied on a USB drive.

  2. This USB is made available in the event of the machine program becoming corrupt and the program needs to be reloaded.

  3. Any program changes made by personnel other than BRML programmers should be documented, and a copy sent to Brml to keep the master records up to date.

  4. Program changes may also be able to be made via the modem (if fitted)

2. Electrical Certificate of Compliance

All electrical component and modules manual will be provided on hand.

3. Electrical Drawing

Please refer the below Electrical Drawing

​

BAR Logo #1_edited_edited.png

Introduction - Enclosures

1. Panel Dimensions

Front and Back.png
electrical2.png
electrical2.png
front and right.png
Bottom.png

2. Gear plate Layout 

pannel layout .png

Servo Drive

gear plate .png

PLC

MCB

Terminals

Power Supply

Utility Socket

Safety Control

VFD

3. Maintenance

Important Precautions: -

​

READ this manual before operating or servicing this equipment.

​

  • ALWAYS remove power and wait at least 30 seconds before connecting / disconnecting any internal harnesses. Failure to observe these precautions may result in damage to, or destruction of the equipment.

  • ALWAYS take proper precautions when handling static sensitive devices.

  • SAVE this manual for future reference.

  • DO NOT allow untrained personnel to operate, clean, inspect, maintain, service or tamper with this equipment. 

  • DO NOT connect or disconnect any digital or analogue components to the equipment with power connected or damage may result.

 

​

4. Risk Assessment

Risk Assessment or HAZOP, or a Hazard and Operability Study, is a systematic way to identify possible hazards in a work process. In this approach, the process is broken down into steps, and every variation in work parameters is considered for each step, to see what could go wrong. 

​

Please refer the below attachment for HAZOP Document.

​

​

bottom of page